SPECIFICATION |
|||||||
| Type No. | Maximum working Voltage | Maximum Over Load Voltage | Dielectric Voltage | Surge with standing voltage | Range | ||
| <1M | 1M1-6M2 | >6M2 | |||||
| WMG 25 / WMG 50M | 1500 V | 3000 V | 500 V | 3000 V | 4000 V | 6000 V | 50K – 1000M |
| WMG 50 / WMG 100M | 2000 V | 4000 V | 700 V | 4000 V | 5000 V | 8000 V | 50K – 1000M |
| WMG 100 / WMG 200M | 3000 V | 5000 V | 1000 V | 5000 V | 6000 V | 9000 V | 50K – 1000M |
| WMG 200 / WMG 300M | 4000 V | 8000 V | 1000 V | 8000 V | 9000 V | 10 KV | 50K – 1000M |
METAL GLAZE RESISTORS
The WMG Series Metal Glaze Resistors are manufactured with the latest sintering process to get the most stable thick metal glaze film. The resistors are insulated with light blue lacquer. WMG series offers a wide range of power rating (0.25W, 0.50W, 1W & 2W) in tolerance ±1% and ±5% with TCR less than 100 ppm/ºC
Description
Reviews (0)
Shipping & Delivery
CHARACTERISTICS
DIMENSIONS (in mm)
| TYPE WMG 25 / WMG 50M | H = 26 ± 2 | L = 6.0 ± 0.4 | D = 2.2 ± 0.1 | d = 0.50 ± 0.05 |
| TYPE WMG 50 / WMG 100M | H = 26 ± 2 | L = 9.0 ± 0.5 | D = 3.2 ± 0.2 | d = 0.60 ± 0.05 |
| TYPE WMG 100 / WMG 200M | H = 26 ± 2 | L = 11 ± 1.0 | D = 4.3 ± 0.5 | d = 0.65 ± 0.05 |
| TYPE WMG 200 / WMG 300M | H = 26 ± 2 | L = 15 ± 1.0 | D = 5.0 ± 0.5 | d = 0.75 ± 0.05 |
STANDARD RESISTANCE VALUE
E 24 Series
| 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 |
| 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
E 96 Series
| 100 | 102 | 105 | 107 | 110 | 113 | 115 | 118 | 121 | 124 | 127 | 130 | 133 | 137 | 140 | 143 |
| 147 | 150 | 154 | 158 | 162 | 165 | 169 | 174 | 178 | 182 | 187 | 191 | 196 | 200 | 205 | 210 |
| 215 | 221 | 226 | 232 | 237 | 243 | 249 | 255 | 261 | 267 | 274 | 280 | 287 | 294 | 301 | 309 |
| 316 | 324 | 332 | 340 | 348 | 357 | 365 | 374 | 383 | 392 | 402 | 412 | 422 | 432 | 442 | 453 |
| 464 | 475 | 487 | 499 | 511 | 523 | 536 | 549 | 562 | 576 | 590 | 604 | 619 | 634 | 649 | 665 |
| 681 | 698 | 715 | 732 | 750 | 768 | 787 | 806 | 825 | 845 | 866 | 887 | 909 | 931 | 953 | 976 |
| Colour | lst figure | 2nd figure | 3rd figure | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 1 | |
| Brown | 1 | 1 | 1 | 10 | ± 1% |
| Red | 2 | 2 | 2 | 100 | ± 2% |
| Orange | 3 | 3 | 3 | 1,000 | |
| Yellow | 4 | 4 | 4 | 10,000 | |
| Green | 5 | 5 | 5 | 100,000 | ± 0.5% |
| Blue | 6 | 6 | 6 | 1,000,000 | ± 0.25% |
| Violet | 7 | 7 | 7 | 10,000,000 | ± 0.1% |
| Gray | 8 | 8 | 8 | ||
| White | 9 | 9 | 9 | ||
| Gold | 0.1 | ± 5% | |||
| Silver | 0.01 | ± 10% |
Related products
WIRE WOUND FUSIBLE RESISTORS
The WWF series wire wound fusible resistors are manufactured to perform as a regular resistor under normal conditions and as a fuse under excessive load. In WWF series, resistors up to 5W, the resistance value is colour coded with 3 bands plus a tolerance band. An additional white band indicates that the resistor is fusible. For resistors 6W and above, the value is printed on the resistor.
LOW OHM CURRENT SENSING RESISTORS CERAMIC ENCASED
The WCSB/WCST/WCSV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are ceramic encased resistors. WATTS offers these resistors ranging from 2mΩ to 50mΩ, having power rating from 2W to 10W.
- WCSB is axial type ceramic boat encased resistor.
- WCSV is vertical type ceramic boat encased resistor.
- WCST is axial type ceramic tube encased resistor.
AUTOMOTIVE GRADE THICK FILM CHIP RESISTORS
The CR-A series Automotive Grade Thick Film Chip Resistors are manufactured by screening a metal glaze layer on a high grade ceramic body. The different resistance values are obtained by using different compositions of metal glaze. The end contacts are made to ensure optimum solderability and terminal strength. The resistive layers are given a non-flammable protective coating. The CR-A series is AEC-Q200 compliant.
The CR-A series offer a wide range of power ratings from 1/20W to 1W and are available in tolerance ranges of ±1% and ±5% with insulation Resistance ? 1000M?. Miniature size, excellent mechanical strength and electrical stability ensures reduced costs and enhances dependability.
ZERO OHM RESISTOR / JUMPER WIRE
The WC12/WC25/WM12/WM25 zero ohm resistors are manufactured to give extremely low resistance value. A single black band indicates that the resistor is Zero ohm. The WJ jumper wires are manufactured using high grade tin plated electrolytic copper wire. This is provided in taped form having 5mm pitch.
METAL FILM RESISTORS
The WMF series Metal Film Resistors are manufactured using the latest Magnetron Vacuum Sputtering System. This ensures a very stable resistive medium having a very low temperature coefficient. The resistors are insulated with layers of light blue lacquer. The WMF series offer a wide range of power rating (0.125W, 0.25W, 0.40W, 0.50W, 1W, 2W & 3W), tolerances (0.1%, 0.5%, 1%, 2%, 5%) and TCRs (15, 25,50 & 100 ppm/ºC)
Reviews
There are no reviews yet.