SPECIFICATION |
|||||||
| Type | Wattage Range [W] | Range in OHMS [mΩ] | Tolerance | Lead Diameter | Diagram | ||
| WCSOA | 2 | 10 | 2 | 20 | 5% | 0.80 ± 0.05 |  |
| WCSOR | 2 | 10 | 2 | 20 | 5% | 0.80 ± 0.05 |  |
| WCSOV | 2 | 10 | 2 | 20 | 5% | 0.80 ± 0.05 |  |
LOW OHM CURRENT SENSING RESISTORS OPEN FRAME
The WCSOA/WCSOR/WCSOV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are open type resistors. WATTS offers these resistors ranging from 2mΩ to 20mΩ, having power rating from 2W to 10W.
- WCSOA is axial type resistor.
- WCSOR is radial pre-formed type resistor.
- WCSOV is PCB mounting shunt type resistor.
Description
Reviews (0)
Shipping & Delivery
Related products
METAL FILM RESISTORS
The WMF series Metal Film Resistors are manufactured using the latest Magnetron Vacuum Sputtering System. This ensures a very stable resistive medium having a very low temperature coefficient. The resistors are insulated with layers of light blue lacquer. The WMF series offer a wide range of power rating (0.125W, 0.25W, 0.40W, 0.50W, 1W, 2W & 3W), tolerances (0.1%, 0.5%, 1%, 2%, 5%) and TCRs (15, 25,50 & 100 ppm/ºC)
METAL OXIDE FLAME PROOF RESISTORS
The WMO series Metal Oxide Film Resistors are manufactured using the latest technology to ensure a very stable resistive medium. The resistors are insulated with layers of flame proof epoxy. The WMO series offer a wide range of power rating (0.25W, 0.50W, 1W, 2W & 3W) having tolerance ranges of ±1 % & ±5 %
METAL GLAZE RESISTORS
The WMG Series Metal Glaze Resistors are manufactured with the latest sintering process to get the most stable thick metal glaze film. The resistors are insulated with light blue lacquer. WMG series offers a wide range of power rating (0.25W, 0.50W, 1W & 2W) in tolerance ±1% and ±5% with TCR less than 100 ppm/ºC
WIRE WOUND RESISTORS – NON INDUCTIVE
The WWN series wire wound resistors - non inductive have very low inductance (less than 1µH), high heat dissipation and low TCR. The resistors are coated using layers of Flame Proof Epoxy with axial lead wire. In WWN series, resistors up to 5W, the resistance value is color coded with 3 bands plus a tolerance band. An additional yellow band indicates that the resistor is Non Inductive. For resistors 6W and above, the value is printed on the resistor.
LOW OHM CURRENT SENSING RESISTORS CERAMIC ENCASED
The WCSB/WCST/WCSV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are ceramic encased resistors. WATTS offers these resistors ranging from 2mΩ to 50mΩ, having power rating from 2W to 10W.
- WCSB is axial type ceramic boat encased resistor.
- WCSV is vertical type ceramic boat encased resistor.
- WCST is axial type ceramic tube encased resistor.
THICK FILM CHIP RESISTORS
The CR series Thick Film Chip Resistors are manufactured by screening a metal glaze layer on a high grade ceramic body. The different resistance values are obtained by using different compositions of metal glaze. The end contacts are made to ensure optimum solderability. The resistive layer is then given a protective coating.
The CR series offer a wide range of power ratings from 1/20W to IW and are available in tolerance ranges of ± 1 % and ±5% % with insulation Resistance ≥ 1000MΩ. .Miniature size, excellent mechanical strength and electrical stability ensures reduced costs and enhances dependability.
Reviews
There are no reviews yet.